clairex technologies, inc. 1301 east plano parkway plano, texas 75074-8524 phone: 972-265-4900 fax: 972-265-4949 www.clairex.com CLE210F aluminum gallium arsenide ired flat lead plcc package clairex ? technologies, inc . april, 2003 all dimensions are in inch es (millimeters) features ? flat lead plcc package ? 5 emission angle ? 880 nm peak wavelength ? custom plastic lens ? available with flat lens description the CLE210F is an 880nm high output infrared emitting diode chip featuring current algaas technology. it is mounted in a compact, embedded leadframe package with flying lead configuration and lensed to provide a narrow emission pattern. contact clairex for alternative wavelength emitter chips, different lenses and lead confi g urations. absolute maximum ratings (t a = 25c unless otherwise stated) storage temperatur e ...................................................................... -40 c to +125c operating temperat ure ................................................................... - 40c to +125c lead soldering temperature (1) .......................................................................... 240c maximum continuous current (2) ....................................................................... 30ma peak forward current (10 s pulse width, 100pps) ................................................ 1a maximum power dissipation (3) ....................................................................... 75mw reverse voltage .................................................................................................... 5v notes: 1. 0.06? (1.5mm) from case for 5 sec onds maximum. maximum temperature can be 260c if reflow soldering. 2. derate linearly 0.24ma/c fr om 25c free air temperature to t a = +125c. 3. derate linearly 0.60mw/c fr om 25c free air temperature to t a = +125c. clairex reserves the right to make changes at any time to improve design and to provide the best possible product. ? electrical characteristics (t a = 25c unless otherwise noted) symbol parameter min typ max units test conditions p o total power output (4) 0.5 - - mw i f = 20ma v f forward voltage - - 1.5 v i f = 20ma i r reverse current - - 10 a v r = 5.0v p peak emission wavelength - 880 - nm i f = 20ma bw spectral bandwidth at half power points - 80 - nm i f = 20ma hp emission angle at half power points - 10 - deg. i f = 20ma note: 4. power output is measured in an integrating sphere. all dimensions are in inches (millimeters) revised 12/01/04
|
